
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X100-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This model features a SUS420J2 stainless steel rod for improved corrosion resistance and includes a magnet for position sensing.
The rear adjustment screw acts strictly as a mechanical stop to fine-tune the retract end position without requiring external stops. It operates at speeds of 30-800mm/s and uses a G1/4 port. For position feedback, the integrated magnet works seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches mounted in the dual-side sensor grooves.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 80-100mm retract position precisely when switching between product sizes on a packaging line, avoiding the need to physically swap cylinders or add spacer shims.
Fine-tune the final retract position during initial commissioning to achieve perfect alignment, using the rear screw to absorb minor mechanical tolerances in the fixture.
The adjustable 80-100mm window is ideal for setups where the exact retract distance needs slight tweaking without swapping the cylinder. It utilizes a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
Because the rear adjuster is a travel stop and not a locking mechanism, this SAIJ cylinder cannot hold a load without live air pressure. If your setup requires true load-holding on air loss, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder, or integrate an external pilot-operated check valve. This profile cylinder is dimensionally interchangeable per ISO 15552.
Quick checklist
The rear adjuster screw allows you to shorten the nominal 100mm stroke by up to 20mm, creating an adjustable travel window of 80-100mm. The adjuster functions as a mechanical stop to set the end position; it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.