
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X100-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that trims the nominal 100 mm travel back by up to 40 mm, yielding a precise 60-100 mm usable window for product changeovers.
This SKU is configured with an SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic sensors, though no magnet is specified for this specific unit.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 60-100 mm travel window on the fly to accommodate different package sizes on a packaging line without swapping out the entire actuator.
Fine-tune the retract end-position during commissioning to perfect the seating of a 628 N press tool without adding bulky external stops.
Leverage the wide 40 mm adjustment band to test multiple stroke lengths on a single fixture, saving time and material during prototype development.
Selecting this 40 mm bore over a 32 mm variant doubles your available thrust, stepping up from 402 N to 628 N at 0.5 MPa, which is critical if your tooling payload increases. The 40 mm adjustment range is exceptionally wide for a 100 mm stroke, making it ideal for prototyping cells where the end-stop position fluctuates significantly between product runs without needing to physically swap cylinders.
For any installation with a stroke of 300 mm or more, external guidance becomes mandatory to prevent side-load damage, but at 100 mm the 16 mm rod handles moderate loads well. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true pneumatic locking, consider the SAIL or BSAI series. To match this exact replacement, verify the 100 mm stroke, 40 mm adjustment, PT port, and basic mounting interface.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective travel from the 100 mm nominal stroke by up to 40 mm, providing a usable 60-100 mm window. It acts as a physical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.