
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X100-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster, enabling you to dial back the 100 mm nominal travel by up to 40 mm. This yields a highly flexible 60-100 mm usable window, allowing precise end-position tuning at commissioning without swapping out the barrel or bolting on external stops.
This specific configuration features a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance and includes an integrated magnet (-S) for seamless position feedback. It is fully compatible with AirTAC CMSE reed switches and DMSE solid-state electronic sensors, which seat neatly into the dual-side sensor grooves on the extruded aluminum barrel. The unit uses PT tapered port threads (G1/4) and relies on the rear screw strictly as a travel stop, meaning it cannot hold a load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 60-100 mm end-stop during product size transitions without physically replacing the cylinder or adding external spacers.
Leverage the built-in magnet and dual sensor grooves to mount CMSE or DMSE switches for precise end-of-travel confirmation.
Utilize the SUS420J2 stainless steel rod for mid-force actuation in environments where standard carbon steel rods would pit or degrade.
The adjustable stroke is ideal for product changeovers on a packaging line, whereas a fixed-stroke SAI is better for dedicated single-purpose stations. For load-holding without continuous air pressure, this cylinder is not a lock; you should explore the SAIL pneumatic lock or BSAI clamp-lock series instead.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 100 mm nominal stroke, 40 mm adjustment range, PT G1/4 port, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, deliberately omitting the FB, CA, CB, and CR styles. Because the 16 mm rod and M12x1.25 thread handle side loads well but the stroke is under 300 mm, an external guide is only necessary if operating under heavy lateral stress.
Quick checklist
A rear adjusting screw acts as a mechanical stop that shortens the 100 mm nominal stroke by up to 40 mm, creating a usable travel window of 60 to 100 mm. This stopper only sets the end position; it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.