
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X100-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 100 mm stroke that can be dialed back by up to 75 mm, yielding a highly flexible 25-100 mm usable travel window for precise end-position tuning during commissioning.
This variant is configured with an SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and uses PT tapered port threads mated to a G1/4 connection. The extruded aluminum barrel incorporates sensor grooves on both sides, allowing you to add CMSE reed or DMSE electronic switches later. Remember that the rear adjuster acts strictly as a travel stop for deceleration, not a lock to hold loads without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 25-100 mm travel window rapidly when switching a packaging line to a different carton size, avoiding mechanical cylinder swaps.
Fine-tune the exact end-of-stroke position during machine commissioning to perfect a 628 N pressing operation without adding external stops.
Use the rear adjuster to create a customizable physical stop for a 40 mm bore assembly station, adapting the reach on the fly for different parts.
Choose this 40 mm bore when an application requires more thrust than a 32 mm cylinder (402 N at 0.5 MPa) but lacks the physical space or force demands of a 50 mm unit (982 N at 0.5 MPa). The extensive 75 mm adjustment range is perfect for prototyping or machinery that frequently processes varying product sizes, eliminating the need to swap physical cylinders or bolt on external stopper blocks when changing the end position.
Because the nominal stroke is 100 mm, side-loading is minimal, but always ensure the M12x1.25 rod thread is properly aligned. If your process requires the load to be mechanically held in place without continuous compressed air, a standard SAIJ will not suffice; you should explore the SAIL air-released lock or BSAI clamp-lock series instead. This profile cylinder is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
At the maximum 1.0 MPa pressure, it can output up to 128 kgf.
The rear adjusting screw acts as a stopper that shortens the effective stroke from its 100 mm nominal length. You can trim the travel back by up to 75 mm, providing a usable 25-100 mm window to fine-tune the retract position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.