
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX100-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 100mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X100-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 100 mm stroke that can be dialed back by up to 75 mm, creating a highly flexible 25-100 mm usable travel window for precise end-position tuning.
This adjustable model uses an external rear stopper screw to set the retract position without requiring a cylinder swap or external stops. The extruded aluminum barrel features sensor grooves on both sides for easy switch mounting. It supports a reduced set of ISO 15552 mounting options including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX100-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 25-100 mm travel window rapidly during format changes on packaging lines, avoiding the need to physically swap out cylinders for different package sizes.
Use the rear adjuster screw to establish precise retract positions during machine commissioning, fine-tuning the end-of-stroke without adding bulky external mechanical stops.
Leverage the built-in magnet with CMSE reed or DMSE electronic sensors alongside the 30-800 mm/s speed range to confirm adjusted positions in automated assembly tasks.
The generous 75 mm adjustment range is ideal for machines processing varying product sizes, allowing you to fine-tune the end-stop during changeovers rather than relying on a fixed-stroke SAI cylinder. When specifying a replacement, match the 40 mm bore, 100 mm nominal stroke, PT tapered port threads, and the -S magnet requirement.
Remember that the rear adjuster functions strictly as a travel stop, not a lock; it cannot hold a load without live air pressure. For load-holding requirements without continuous air, consider an AirTAC SAIL or BSAI cylinder instead. The 16 mm rod and M12x1.25 thread provide good rigidity, but always support long unsupported loads with an external guide.
Quick checklist
It features a rear stopper screw that allows you to shorten the effective stroke by up to 75 mm. This creates a usable travel window of 25-100 mm, letting you set the exact retract position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.