
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX1000-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 1000mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X1000-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 980-1000 mm usable travel window, allowing you to trim the effective stroke by up to 20 mm during commissioning without swapping the cylinder.
This variant features a SUS420J2 stainless steel rod (code A) for improved corrosion resistance and includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum barrel retains standard ISO 15552 mounting dimensions, and fluid control is managed via a PT tapered G1/4 port.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX1000-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 980-1000 mm travel window on the fly to accommodate different product lengths without physically replacing the cylinder or adding external stopper blocks.
Handles extended reach sorting on conveyors where the exact end position needs minor calibration during installation to align perfectly with downstream equipment.
Dial in the exact end-of-stroke contact point for delicate assembly operations, using the rear screw to absorb slight mechanical tolerance variations safely.
The adjustable stroke is ideal for variable end-stops and machine changeovers, whereas a fixed SAI cylinder is sufficient for static stops. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Because the stroke is 1000 mm, the 16 mm rod requires external guidance to prevent excessive side-loading and rod bending. The rear adjuster acts strictly as a travel stop and does not hold the load without live air; for dead-air load holding, consider an external rod lock or the SAIL series. To match this ISO 15552 replacement, specify: 40 mm bore, 1000 mm stroke, 20 mm adjustment, PT port, desired mounting, and the -S magnet.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the 1000 mm nominal stroke by up to 20 mm, creating a 980-1000 mm usable travel window. This stopper only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.