
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX1000-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 1000mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X1000-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that allows you to fine-tune the retract end-position. With a nominal 1000 mm stroke and a 75 mm adjustment range, it provides a usable travel window of 925 to 1000 mm.
This unit is configured with an SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance, PT tapered port threads, and operates without a magnet. The extruded aluminum barrel includes sensor grooves on both sides should you later need to integrate position detection. Because the stroke reaches 1000 mm on a 16 mm rod, external guiding is recommended to prevent excessive side-loading on the piston rod.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX1000-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 1000 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 925-1000 mm retract position during product size changeovers without physically swapping the cylinder or adding external mechanical stops.
Ideal for long-stroke sorting or diverting tasks where the exact end position needs minor tweaking to accommodate varying package dimensions.
Fine-tune the end-of-stroke datum during machine commissioning, using the rear screw to perfect the 1000 mm travel without recalculating fixed stopper distances.
The 75 mm adjustment screw lets you dial in the exact retract position during commissioning or product changeovers without adding external stopper blocks. Remember that the rear adjuster functions strictly as a travel stop, not a lock—the cylinder cannot hold a load without live air pressure. For load-holding requirements, consider an AirTAC SAIL or BSAI series cylinder.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 40 mm bore, 1000 mm nominal stroke, 75 mm maximum adjustment, PT G1/4 port, and your required mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR options. This model lacks a magnet (-S), so it is not compatible with CMSE or DMSE sensors out of the box.
Quick checklist
At the maximum 1.0 MPa pressure, it achieves 128 kgf.
The rear adjuster screw acts as a stopper that lets you shorten the effective stroke by up to 75 mm. This creates a usable travel window of 925 to 1000 mm, allowing you to trim the retract position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.