
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX105-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X105-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 105 mm travel back by up to 100 mm. This creates a wide 5-105 mm usable stroke window, ideal for highly variable end-position tuning during machine commissioning or product changeovers.
This variant features an SUS420J2 stainless steel rod for enhanced corrosion resistance compared to standard carbon steel. The rear adjuster acts strictly as a mechanical stop to set the travel end and relies on the integrated air cushions for deceleration; it does not lock or hold the load without continuous live air pressure. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 5 and 105 mm during machine commissioning to perfect pick-and-place positioning without adding external stopper blocks.
Quickly adapt automated clamping or feeding stations to new part dimensions by turning the rear adjuster screw rather than replacing the entire cylinder.
Leverage the SUS420J2 stainless steel rod in light-duty manufacturing cells where minor moisture or coolant splash might compromise standard carbon steel rods.
The massive 100 mm adjustment range on a 105 mm stroke allows you to dial in the exact end-stop dynamically during setup without swapping out the physical cylinder for a shorter unit. To replace an ISO 15552 cylinder, match the 40 mm bore, 105 mm stroke, PT G1/4 port, and the desired mounting bracket.
Because the adjustment mechanism acts on the retract end and the cylinder lacks a self-locking feature, it cannot hold a load safely without live air. For dead-piston load-holding requirements, consider the SAIL or BSAI series, or integrate an external pilot-operated check valve. The 16 mm rod and M12x1.25 thread provide robust resistance to side loads, though any stroke over 300 mm would require an external guide to prevent rod deflection.
Quick checklist
If you increase the pressure to 0.7 MPa, the push force reaches 879 N.
The rear adjuster screw mechanically limits the piston's retract travel, allowing you to shorten the effective stroke from its 105 mm nominal length down to as little as 5 mm. This stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.