
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX105-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X105-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 85 to 105 mm, allowing you to trim the nominal 105 mm stroke by up to 20 mm.
This variant uses a SUS420J2 stainless steel rod (material code A) for improved corrosion resistance compared to standard carbon steel. The PT tapered port threads match the G1/4 air connection standard for this bore size. As an extruded aluminum profile cylinder, it includes sensor grooves on both sides, though you will need to add a magnet separately to use CMSE reed or DMSE electronic switches.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 85-105 mm window when switching product sizes on a packaging line, avoiding physical stop replacements.
Fine-tune the final resting position of a tooling head during commissioning to compensate for mechanical tolerances without machining spacers.
Adjust the stroke length of a diverting arm on the fly to accommodate different package widths on a conveyor system.
The adjustable stroke is ideal for machine setup and product changeover, letting you fine-tune the retract end position at commissioning without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for positive load-holding without pressure, consider an external rod lock or the AirTAC SAIL lock variant.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 105 mm stroke, 20 mm adjustment range, PT port threads, and your required mounting style. SAIJ supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR mounts found on some other series.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, creating a usable travel window of 85 to 105 mm. The adjuster is a mechanical stop that sets the end position; it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.