verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX105-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke105 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$93.48 $100.98Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30

The AirTAC SAIJ40X105-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 105 mm travel that can be dialed back by up to 30 mm, yielding a precise 75-105 mm usable window for commissioning without external stops.

This variant features a SUS420J2 stainless steel rod (material code A) for improved corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU omits the magnet, meaning position sensing via CMSE or DMSE switches requires adding the -S option at order. Fluid ports are PT tapered threads sized at G1/4.

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke105 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×105Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30 Is Used

tune

Product Changeovers

Dial in the 75-105 mm travel window during format changes on packaging lines, avoiding the need to physically swap cylinders for different package sizes.

settings_input_component

End-Stop Calibration

Fine-tune the retract position during machine commissioning to perfectly align picks and places without machining external hard stops.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30 the Right Cylinder?

The 30 mm adjustment range is ideal for product changeovers on a line, allowing operators to fine-tune the retract end position without swapping the cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.

Because the stroke is 105 mm, side-load risks are minimal, but always ensure the M12x1.25 rod thread is properly aligned. Remember that the rear adjuster acts strictly as a travel stop and does not hold the load without live air; for pilot-operated locking, consider the SAIL or BSAI series. To replace an existing ISO 15552 unit, match the 40 mm bore, 105 mm stroke, PT G1/4 port, and desired mounting interface.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.

The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective stroke from its 105 mm nominal length down to as little as 75 mm. It only sets the travel end and does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40AX105-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.