verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX105-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke105 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$93.48 $100.98Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40

The AirTAC SAIJ40X105-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 65 to 105 mm, allowing you to dial back the nominal 105 mm stroke by up to 40 mm during machine setup.

This variant is configured with a SUS420J2 stainless steel rod for enhanced corrosion resistance and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting, while the rear adjuster functions strictly as a travel stop to decelerate the piston rather than a load-holding lock.

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke105 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×105Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40 Is Used

tune

Changeover Adjustment

Dial in the exact 65 to 105 mm end-stop during product size changeovers without installing external physical stops.

precision_manufacturing

Assembly Positioning

Fine-tune the retraction point during machine commissioning to ensure perfect alignment of clamped parts.

conveyor_belt

Diversion Control

Adjust the stroke length on the fly to accommodate varying package dimensions on a sorting conveyor.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40 the Right Cylinder?

Select this 40 mm bore cylinder when an application requires precise end-position tuning without swapping out physical components. The 40 mm adjustment range is significantly larger than smaller codes, making it highly suited for product-size changeovers on a packaging line. For lower force needs, the 32 mm bore provides 402 N.

When replacing an ISO 15552 cylinder, match the 105 mm nominal stroke, 40 mm adjustment code, PT G1/4 port, and the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting footprint. Because this is a standard 105 mm stroke, it falls well within the 1200 mm maximum standard limit. Remember that a plain SAIJ does not hold loads without live air; for fail-safe load holding, consider the SAIL or BSAI series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40 FAQ

The rear adjuster acts as an external stopper that lets you shorten the effective stroke from 105 mm down to as little as 65 mm, providing a 40 mm tuning window without changing the cylinder itself.

At 0.7 MPa, the push force increases to 879 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40AX105-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.