
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX105-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X105-50-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 105 mm stroke that can be fine-tuned down by up to 50 mm, giving you a precise 55-105 mm usable travel window during commissioning.
This adjustable model uses an external stopper screw at the retract end to set the exact end position without adding external stops. The adjuster acts purely as a travel stop and does not hold the load without live air; for pilot-operated check valve or locking needs, consider the SAIL or BSAI series. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX105-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 55-105 mm travel window during format changes on packaging lines without physically replacing the actuator.
Fine-tune the retract end-stop at commissioning to perfect part seating or clamping depth, avoiding the need for external stopper blocks.
Leverage the built-in magnet with DMSE electronic or CMSE reed switches to confirm the adjusted end-position in automated assemblies.
The 50 mm adjustment range is ideal for product-size changeovers on a line, letting you dial in the 55-105 mm travel window without swapping the cylinder. For fixed end-positions, a standard SAI cylinder is simpler, but the SAIJ excels where variable end-stops are required.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 105 mm stroke, 50 mm adjust code, PT tapered port thread, and the -S magnet. The 16 mm rod and M12x1.25 thread handle moderate side loads well, though long unsupported strokes still need an external guide.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 105 mm nominal stroke down to as little as 55 mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.