Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40AX45-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ40 mm
- Stroke45 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM12×1.25
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10
The AirTAC SAIJ40X45-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 35-45 mm, allowing you to dial back the 45 mm nominal stroke by up to 10 mm during machine setup.
This variant uses a SUS420J2 stainless steel rod for superior corrosion resistance and features PT tapered port threading. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10 Technical Specifications
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10 Is Used
End-Position Tuning
Dial in the exact 35 to 45 mm travel distance during commissioning to perfect a delicate pressing or forming operation without mechanical rework.
Product Changeover
Quickly adapt the cylinder's stroke limit on a packaging line when switching to a different carton size, saving valuable setup time.
Assembly Fixture Calibration
Use the 10 mm adjustment range to set precise contact points for delicate component placement, preventing overtravel damage.
Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10 the Right Cylinder?
The adjustable stroke is ideal for product changeovers, letting you fine-tune the end position without swapping cylinders or adding external stops. Because the rear adjuster acts only as a travel stop and not a lock, you must maintain live air to hold a load; for fail-safe holding, consider the SAIL or BSAI series. To match ISO 15552 interchangeability, verify the 45 mm stroke, 10 mm adjustment, PT G1/4 port, and specific mounting accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10 FAQ
At the maximum 1.0 MPa pressure, it can generate up to 128 kgf.
The rear adjuster screw acts as a mechanical stop that shortens the effective travel from the 45 mm nominal stroke down to as little as 35 mm. It allows fine-tuning of the retract end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40AX45-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.