
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X105-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X105-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel. With a 105 mm nominal stroke and a 100 mm adjustment range, it provides a wide usable travel window of 5 to 105 mm.
The carbon steel piston rod features an M12x1.25 thread, and the body uses a PT tapered port. Unlike fixed-stroke SAI cylinders, this adjustable variant lets you fine-tune the retract end-position at commissioning without swapping the barrel. The extruded aluminum profile includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance for multi-part machining operations without repositioning the cylinder or adding mechanical stops.
Quickly adjust the stroke window from 5 to 105 mm to accommodate varying package sizes on a conveyor sorting line.
Fine-tune the end of travel during initial setup to perfect timing and positioning without disassembling the pneumatic circuit.
Choose this 40 mm bore when you need precise variable end-stops for product changeovers on a packaging line, as the 100 mm adjustment window allows immense flexibility without adding external stops. If your application requires less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa, while moving up to a 50 mm bore provides 982 N for heavier loads. Because the stroke is under 300 mm, side-load stress is minimal, though long unsupported strokes still need an external guide.
To match this ISO 15552 dimensionally interchangeable cylinder for a replacement, specify the 40 mm bore, 105 mm stroke, 100 mm adjustment, PT port thread, and your preferred mounting accessory from the SAIJ set: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Note that the rear adjuster is a travel stop, not a lock; a plain SAIJ does not hold its load without live air, so for fail-safe load holding, consider the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the 105 mm nominal stroke down to as little as 5 mm, providing a 5 to 105 mm usable travel window. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.