
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X105-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X105-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 105 mm stroke that can be dialed back by up to 30 mm, giving you a precise 75-105 mm usable travel window for fine-tuning end positions at commissioning.
This adjustable stopper acts solely as a travel end deceleration point, not a load-holding lock, meaning the cylinder requires live air to maintain its position. It features a carbon steel piston rod with an M12x1.25 thread, paired with PT tapered port threading (G1/4) for secure pneumatic connections. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily add CMSE reed or DMSE electronic switches if position feedback is later required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial the rear adjuster to shift the travel window from 105 mm down to 75 mm instantly when adapting machinery for a new product run.
Fine-tune the exact retraction point during commissioning without fabricating external stopper blocks or shimming the mount.
Adjust the stroke length on the fly to handle different package sizes on a sorting line, ensuring precise physical contact.
The 30 mm adjustment range is ideal for product changeovers on a line, letting you shift the end stop between 75 and 105 mm without swapping the cylinder or adding external stops. For fixed-travel tasks where no end-position tuning is needed, a standard SAI cylinder is a simpler alternative.
When specifying a replacement, match the 40 mm bore, 105 mm nominal stroke, 30 mm adjuster, PT port thread, and mounting choice from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that FB, CA, CB, and CR mounts are omitted from this series. Because this is a standard double-acting cylinder, it will not hold a load without continuous air pressure; if your setup requires fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder instead.
Quick checklist
If operated at 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm. This creates a usable travel window of 75 to 105 mm, letting you set the exact end position during installation without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.