verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X105-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke105 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$73.01 $80.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-40

The AirTAC SAIJ40X105-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the retract end position. It provides a usable travel window of 65-105 mm, letting you shorten the nominal 105 mm stroke by up to 40 mm during machine commissioning.

This adjustable-stroke design eliminates the need to swap out the entire cylinder or bolt on external stops when product sizes change. It supports a speed range of 30-800 mm/s and includes variable air cushions at both ends to manage deceleration. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X105-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke105 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×105Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-40 Is Used

tune

Variable End Stops

Dial in the exact retract distance between 65 and 105 mm to accommodate different material thicknesses without changing the cylinder.

settings_input_component

Machine Changeover

Quickly readjust the travel end position during product size transitions on a packaging or assembly line.

precision_manufacturing

Setup Calibration

Fine-tune the final position during initial commissioning to align tooling perfectly, avoiding the cost of custom spacers.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-40 the Right Cylinder?

The rear adjustment screw is ideal for product changeovers on a shared line, offering a distinct advantage over a fixed-stroke SAI cylinder. Because the stroke is 105 mm, an external guide is not strictly required for side loads, but the 16 mm rod and M12x1.25 thread handle standard lateral stresses well. To match this ISO 15552 cylinder, specify a 40 mm bore, 105 mm stroke, 40 mm adjustment, PT port, and your preferred mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). A magnet is not included for sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-40 FAQ

If you increase the pressure to 0.7 MPa, the push force reaches 879 N.

The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from the 105 mm nominal length by up to 40 mm. This creates a usable travel window of 65-105 mm, which can be fine-tuned during setup.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X105-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.