
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X105-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 105mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X105-50-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 105 mm stroke that can be fine-tuned backward by up to 50 mm, yielding a highly flexible 55-105 mm usable travel window. This on-cylinder adjustability allows operators to dial in exact end-of-travel positions during commissioning or product changeovers without swapping out the entire actuator or adding external stops.
This variant includes a standard magnet (-S) for electronic positioning feedback, operating seamlessly with AirTAC DMSE solid-state sensors and CMSE reed switches housed in the dual-side sensor grooves of the extruded aluminum barrel. The M12x1.25 piston rod thread and 16 mm rod diameter provide a robust interface for mounting attachments, handling moderate side loads effectively. It is important to note that the rear adjuster functions purely as a travel stop to decelerate the load alongside the built-in air cushions; it does not lock or hold the load in place without live air pressure. For positive load-holding requirements, exploring the SAIL or BSAI series is recommended.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X105-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-105 mm stroke window during product size transitions to set new end-stops without replacing the cylinder or adding external stopper blocks.
Fine-tune the retract position on a sorting diverter arm to accommodate different package lengths on the fly, ensuring precise routing without mechanical rebuilds.
Trim the effective travel backward by up to 50 mm during initial machine setup to perfectly time the 16 mm rod extension with the tooling datum.
The 50 mm adjustment range is particularly valuable on flexible manufacturing lines where product sizes change frequently, allowing the end-stop to be reconfigured in minutes. When specifying your replacement, match the 105 mm stroke, 50 mm adjuster, PT tapered port threads, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR brackets found on some other ISO 15552 variants.
Quick checklist
The rear adjuster screw acts as a mechanical stop that can shorten the 105 mm nominal stroke by up to 50 mm, giving a usable travel window of 55-105 mm. It sets the end position and works with the air cushions to decelerate the load, but it is not a lock and will not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.