
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X110-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 110mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X110-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 110 mm nominal stroke that can be dialed back by up to 100 mm, providing a wide 10-110 mm usable travel window for highly variable end-position tuning.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch mounting. The rear screw functions purely as a mechanical stop to set the retract position and relies on the variable air cushion for end-of-stroke deceleration; it does not lock the load without continuous air pressure. The carbon steel piston rod features an M12x1.25 thread, and pneumatic connections use a PT tapered G1/4 port.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 10-110 mm travel window during product size changes to set new retract positions rapidly without replacing the actuator.
Fine-tune the end-stop during initial commissioning to find the exact 40 mm bore stroke needed before finalizing a machine design.
Select this 40 mm bore actuator when an application demands a highly flexible retract end-stop without swapping cylinders, offering a step up in thrust from the 32 mm bore (402 N at 0.5 MPa) while remaining more compact than the 50 mm option (982 N). The massive 100 mm adjustment range is perfect for prototyping or product changeovers. If your setup requires holding a load without live air pressure, pair this cylinder with an external pilot-operated check valve or choose the AirTAC SAIL or BSAI locking series instead.
For a direct ISO 15552 replacement, match the 40 mm bore, 110 mm stroke, 100 mm adjustment code, PT G1/4 port, and carbon steel rod. Because this is a non-magnet model, position sensing requires adding a magnet (-S) to use AirTAC CMSE reed or DMSE electronic sensors. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to mechanically shorten the 110 mm nominal stroke by up to 100 mm, creating a 10-110 mm usable travel window. The adjuster acts as a stop for the retract position and must not be used as a load-holding lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.