
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X110-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 110mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X110-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel. With a 110mm nominal stroke and a 20mm adjustment range, it provides a usable 90-110mm travel window for precise end-position tuning at commissioning.
This model features a carbon steel piston rod with an M12x1.25 thread and a G1/4 PT tapered port. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches if a magnet is specified later. It uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and relies on variable air cushions at both ends to decelerate the load.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 90-110mm end-stop position during product size changes without machining new stopper blocks.
Use the 20mm rear adjuster to compensate for mechanical wear or slight misalignments during commissioning.
The 20mm adjustment range is ideal for product changeovers or variable end-stops, allowing you to fine-tune the 90-110mm travel window without swapping the cylinder or adding external stops.
For ISO 15552 replacement, match the 40mm bore, 110mm stroke, 20mm adjustment, G1/4 PT port, and required mounting accessories. Note that the rear adjuster and air cushions act as travel stops and deceleration only; they do not hold the load without live air pressure. For true load-holding without continuous air, consider the SAIL or BSAI series. Since the stroke is 110mm, standard mounting is generally sufficient without external guides, though long unsupported rods always benefit from proper alignment.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to shorten the 110mm nominal stroke by up to 20mm, creating a usable travel window of 90-110mm. This lets you fine-tune the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.