verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X110-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 110mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke110 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$73.01 $80.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-30

The AirTAC SAIJ40X110-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 30 mm. This creates a usable stroke window of 80-110 mm, enabling precise end-position tuning at commissioning without swapping out the cylinder or adding external stops. It features a 16 mm carbon steel piston rod and a PT tapered G1/4 port.

The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X110-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke110 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×110Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-30 Is Used

tune

Machine Changeovers

Dial in the 80-110 mm travel window on the fly to accommodate different product sizes without changing the cylinder.

precision_manufacturing

End-Position Tuning

Fine-tune the retract stroke during commissioning to hit exact machine positions without adding external stopper blocks.

conveyor_belt

Conveyor Diverter

Adjust the actuation distance precisely to push varying package sizes onto secondary conveyor lanes.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-30 the Right Cylinder?

Choose this adjustable-stroke model over a fixed SAI cylinder when your machine setup requires variable end-stops or product-size changeovers. To match this cylinder for an ISO 15552 replacement, verify the 40 mm bore, 110 mm stroke, 30 mm adjustment, PT G1/4 port, and the required mounting bracket. Since the stroke is under 300 mm, side-load stress is moderate, but the 16 mm rod still requires an external guide for heavy lateral loads.

Remember that the rear adjuster acts only as a mechanical stop and does not hold the load without live air pressure. For fail-safe load holding without continuous air, consider the SAIL pneumatic lock or BSAI clamp-lock cylinder series instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-30 FAQ

The rear adjuster screw lets you shorten the nominal 110 mm stroke by up to 30 mm, providing an adjustable usable travel window between 80 and 110 mm. The adjuster is a mechanical stop, not a lock, so it cannot hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X110-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.