verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X110-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 110mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke110 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$73.01 $80.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-75

The AirTAC SAIJ40X110-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This creates a highly flexible usable travel window of 35 to 110 mm, letting you dial in the exact retract position without swapping out the unit.

The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE or DMSE switches, though this specific configuration omits the internal magnet. The piston rod is equipped with an M12x1.25 thread and is built from standard carbon steel. It utilizes a PT tapered port thread and features variable air cushions at both ends to manage end-of-stroke kinetic energy.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X110-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke110 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×110Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-75 Is Used

settings_input_component

Variable End-Stop Positioning

Ideal for assembly stations where the retract distance must be fine-tuned on the fly, using the 75 mm adjustment range to accommodate different part depths without changing hardware.

factory

Machine Changeover Setup

Speeds up product family changeovers on packaging lines by allowing operators to simply dial back the stroke from 110 mm down to 35 mm to handle smaller format sizes quickly.

tune

Commissioning Calibration

Perfect for prototype machinery where the exact retract position is unknown during initial design, allowing engineers to set the precise travel limit during commissioning.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-75 the Right Cylinder?

Choose this 40 mm bore adjustable-stroke model when your machine setup requires frequent product changeovers or precise end-position tuning across a 35 to 110 mm span, eliminating the need to bolt on external stops or maintain multiple fixed-stroke SAI cylinders. Conversely, stepping up to a 50 mm bore increases that output to 982 N.

Because the nominal stroke is 110 mm, external side-load guides are less critical here, though the M12x1.25 rod handles standard loads well. Remember that the rear adjuster acts only as a mechanical stop and does not hold the load without live air pressure; for true fail-safe load holding, consider an external rod lock or AirTAC SAIL and BSAI series cylinders. This unit is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-75 FAQ

It features a rear adjusting screw that acts as a mechanical stopper, allowing you to shorten the 110 mm nominal stroke by up to 75 mm. This provides a usable travel window of 35 to 110 mm, which can be fine-tuned during commissioning without replacing the cylinder.

If you increase the pressure to 0.9 MPa, the push force reaches 1130 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X110-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X110-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.