
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X115-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 115mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a carbon steel piston rod and a PT tapered port thread. Because the adjustment code is 100mm on a 115mm nominal stroke, technicians gain a wide usable travel window from 15 to 115mm.
This wide trim range allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops. The rear mechanism acts purely as a travel stop for deceleration and does not hold the load without live air pressure. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 15-115mm travel window rapidly when switching between product sizes on a packaging line without bolting on external stops.
Fine-tune the exact end position during machine setup to perfect the stroke length for delicate picking and placing operations.
Adjust the retract distance on the fly for testing fixtures, allowing flexible spacing without replacing the entire actuator.
Choose this 40mm bore when an application requires variable end-stops or frequent product-size changeovers, providing 528N of pull force at 0.5 MPa. For load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is not a lock. To match this ISO 15552 dimensionally interchangeable cylinder, specify the 40mm bore, 115mm stroke, 100mm adjustment, PT port, and standard carbon steel rod without a magnet.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw lets you trim the effective travel back by up to 100mm from the 115mm nominal stroke, creating a usable window of 15 to 115mm. It functions as a stop to set the end position, not as a lock to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.