
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X115-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 115mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By turning the rear screw, you achieve an 85 to 115 mm usable travel window without swapping hardware. This fine-tuning capability is ideal for dialing in exact end positions during commissioning or product changeovers.
It features a 16mm carbon steel rod with an M12x1.25 thread and a PT tapered G1/4 port. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Rapidly reconfigure end positions for different product sizes on a packaging line by dialing the rear stopper back by up to 30mm.
Fine-tune the 85-115mm travel window during initial setup to perfect the mechanical timing without adding external stops.
Adjust the retract position on the fly for assembly stations that process multiple part lengths within the same fixture.
The 30mm adjustment range is selected when a process requires frequent variable end-stop modifications, unlike a fixed-stroke SAI cylinder which locks you into a single dimension. Ensure your external guide can handle side loads, as the adjuster acts purely as a travel stop and does not hold the load without live air.
To match this ISO 15552 interchangeable cylinder for a replacement, verify the 40mm bore, 115mm nominal stroke, 30mm adjustment range, PT G1/4 port, and the required mounting bracket. Since no magnet is specified, position sensing via CMSE or DMSE switches is not supported on this specific configuration.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster acts as a mechanical stop that shortens the effective travel from the 115mm nominal stroke down to as little as 85mm. It decelerates the stroke end but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.