verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X115-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 115mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke115 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$73.01 $80.51Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-75

The AirTAC SAIJ40X115-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a generous usable travel window of 40 to 115 mm, allowing you to dial back the 115 mm nominal stroke by up to 75 mm during machine setup.

This adjustable design eliminates the need to swap cylinders or bolt on external stops when refining end positions. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if you later add a magnet. It uses a PT tapered port thread and a 16 mm carbon steel rod with an M12x1.25 thread, which handles side loads well within its 30 to 800 mm/s speed range.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X115-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke115 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×115Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-75 Is Used

tune

Variable End-Stop Positioning

Dial in the exact retract distance between 40 and 115 mm for precise end-position tuning during machine commissioning without adding external stops.

settings_input_component

Product-Size Changeover

Quickly adapt the effective stroke on packaging lines when product dimensions change, using the 75 mm adjustment range to handle multiple formats on one station.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-75 the Right Cylinder?

Choose this 40 mm bore model when your application requires a wide variable end-stop range for frequent product-size changeovers.

The rear adjuster on this SAIJ cylinder acts purely as a travel stop to decelerate the load, not as a lock. It cannot hold a load in place without live air pressure. If your setup requires fail-safe load holding without continuous air, use an external rod lock or pilot-operated check valve, or select the related SAIL or BSAI series. For ISO 15552 replacement matching, specify a 40 mm bore, 115 mm stroke, 75 mm adjustment, PT port, and standard carbon steel rod without a magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-75 FAQ

At the maximum 1.0 MPa pressure, it delivers up to 128 kgf of thrust.

A rear adjusting screw acts as a mechanical stopper, allowing you to shorten the 115 mm nominal stroke down to a minimum of 40 mm. This creates a 40-115 mm adjustable travel window for fine-tuning end positions without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X115-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X115-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.