
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X120-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 120mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X120-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 110-120 mm usable travel window, letting you fine-tune the retract end-position by up to 10 mm during commissioning.
This variant includes a standard carbon steel rod and a magnet for position sensing. It uses PT tapered G1/4 ports and is compatible with AirTAC CMSE reed and DMSE solid-state switches mounted in the dual-side sensor grooves. The mounting interface covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X120-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 10 mm stroke adjustment during product size changeovers to set new retract end-stops without swapping the entire cylinder.
Fine-tune the actuator's 110-120 mm travel window to perfectly align a diverting arm with varying package widths on the line.
Use the rear stopper screw to compensate for mechanical wear or slight sensor shifts, ensuring precise end-positioning over time.
The 10 mm rear adjuster is ideal for dialing in exact end-stops without adding external physical stops. The rear adjuster acts only as a travel stop and does not hold the load without live air; for true pneumatic locking without pressure, consider the SAIL or BSAI series. To match this ISO 15552 footprint, verify the 120 mm stroke, 10 mm adjustment, PT G1/4 ports, and the -S magnet requirement.
Quick checklist
The rear adjuster screw allows you to shorten the 120 mm nominal stroke by up to 10 mm, creating a 110-120 mm travel window. This stopper decelerates and sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.