
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X120-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 120mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X120-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 100-120 mm for precise end-position tuning. The integrated magnet supports position sensing with AirTAC CMSE reed and DMSE electronic solid-state switches.
This extruded aluminum profile cylinder omits the FB, CA, CB, and CR mounts, offering a focused mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts purely as a mechanical stop to trim the stroke without swapping the cylinder, but it does not lock the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X120-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 100-120mm travel during commissioning to perfect part ejection without adding external stopper blocks.
Quickly adjust the retract end-position on a packaging line when switching to a different carton size.
Fine-tune the stroke window on the fly for assembly presses that require precise end-of-travel positioning.
Select this 40mm bore cylinder when your application requires variable end-stops or commissioning fine-tuning rather than a fixed-stroke SAI. Stepping down to a 32mm bore drops the push force to 402N at 0.5 MPa, while stepping up to a 50mm bore increases it to 982N. Because this is a 120mm stroke under the 300mm threshold, external side-load guides are less critical, though the 16mm rod and M12x1.25 thread handle moderate side loads well.
For ISO 15552 replacement, match the 40mm bore, 120mm nominal stroke, 20mm adjustment range, PT port thread, and the -S magnet requirement. Remember that the rear adjuster and air cushions only decelerate the travel end; for load-holding without live air, use an external rod lock or consider the SAIL or BSAI series.
Quick checklist
The rear adjuster screw lets you mechanically shorten the effective stroke by up to 20mm, creating a 100-120mm travel window. It acts as a stop to fine-tune the end position without replacing the cylinder.
At the maximum operating pressure of 1.0 MPa, it can deliver up to 128kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.