
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X125-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 125mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X125-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. This built-in adjustability eliminates the need to swap cylinders during product changeovers or add external stops.
Equipped with a 16mm carbon steel rod and an M12x1.25 thread, it handles side loads effectively while operating at speeds of 30-800 mm/s. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X125-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 75-125mm travel window during line changeovers to accommodate different product lengths without swapping the physical cylinder.
Acts as an adjustable end-stop for diverters on a conveyor, allowing operators to shorten the stroke by up to 50mm on the fly for varying package sizes.
The 50mm adjustment window is particularly useful for packaging lines running multiple carton sizes. For load-holding without continuous air pressure, integrate an external pilot-operated check valve or select the SAIL or BSAI series, as the SAIJ adjuster is strictly a stop. To match this ISO 15552 replacement exactly, specify: 40mm bore, 125mm stroke, 50mm adjust, PT tapered port thread, carbon steel rod, no magnet, and the required mounting bracket.
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster screw allows you to mechanically shorten the effective stroke from its nominal 125mm down to a minimum of 75mm. This creates a 75-125mm travel window for fine-tuning the end position at commissioning without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.