
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X125-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 125mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X125-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear mechanical adjuster. Because this SKU includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE solid-state sensors mounted into the dual-side extruded barrel grooves.
This specific model features a substantial 75mm stroke adjustment range, creating a usable travel window between 50mm and 125mm. This wide tuning band allows operators to dial in exact end-of-stroke positions during machine commissioning or product changeovers without swapping out the physical cylinder. The SAIJ mounting set omits FB, CA, CB, and CR brackets, offering Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces for dimensionally interchangeable ISO 15552 direct replacement.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X125-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Leverage the 50-125mm travel window to quickly reposition folding stops on packaging machinery when switching between different product box dimensions.
Fine-tune the retract end-position during machine setup without machining external stopper blocks or disassembling the cylinder mounting.
Act as a retractable guide or diverter arm on a conveyor belt where the required extension distance changes based on the product profile.
If you need less force, stepping down to a 32mm bore yields 402N; if your load demands more, stepping up to a 50mm bore provides 982N. The 75mm adjuster here is ideal for packaging lines that run multiple carton sizes, acting as a variable end-stop to reposition the retract stroke rapidly.
When replacing an ISO 15552 cylinder, match the 40mm bore, 125mm nominal stroke, G1/4 PT ports, and the -S magnet requirement. Keep in mind the rear adjuster and the variable air cushions only decelerate the moving load at the travel end; they do not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL pneumatic lock or BSAI clamp-lock series instead.
Quick checklist
The rear of the cylinder features an external adjusting screw that physically stops the piston short of its full travel. With the 75mm adjustment code, you can trim the effective stroke back from 125mm down to as little as 50mm, creating a 50-125mm usable travel window.
It operates at speeds between 30 and 800mm/s and includes a 30mm air cushion at both ends to decelerate the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.