
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X130-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 130mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X130-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 55 to 130 mm, allowing you to dial back the nominal 130 mm stroke by up to 75 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches if a magnet is specified later. The M12x1.25 carbon steel rod thread provides a robust connection point, and the cylinder uses a PT tapered port thread. It supports a speed range of 30-800 mm/s and relies on adjustable air cushions at both ends to decelerate the load.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X130-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 55 and 130 mm during machine setup to perfect positioning without machining external spacers.
Quickly adjust the stroke length up to 75 mm to accommodate different product sizes on a single production line.
Fine-tune the final end position at machine commissioning to clear mechanical interference without replacing the ISO 15552 cylinder.
Choose this 40 mm bore adjustable-stroke cylinder when your application requires fine-tuning the retract end position on the fly, such as accommodating product size changes without swapping out the entire cylinder or adding external stops. For lighter duty, the 32 mm bore provides 402 N.
Because the 130 mm stroke is relatively short, side-load stress on the M12x1.25 rod is minimal, but an external guide is still recommended for heavy lateral loads. Remember that the rear adjuster acts as a travel stop, not a lock; the SAIJ40X130-75 cannot hold a load without live air pressure. For drop-and-hold requirements, consider the SAIL or BSAI series. This model uses the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets.
Quick checklist
It supports a standard operating speed range of 30-800 mm/s.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 130 mm nominal stroke by up to 75 mm, creating a usable travel window of 55 to 130 mm. It only sets the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.