verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-100

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X135-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 135mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke135 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$75.13 $82.63Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-100

The AirTAC SAIJ40X135-100 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 135 mm stroke that can be dialed back by up to 100 mm, yielding a highly flexible usable travel window of 35 to 135 mm.

The extruded aluminum barrel features sensor grooves on both sides for direct mounting of position switches. This version uses a standard carbon steel piston rod with an M12x1.25 thread and PT tapered porting. By turning the rear adjustment screw, you can set precise end-of-travel limits at commissioning or during product changeover without adding external stops. Note that this adjuster functions strictly as a travel stop to set deceleration alongside the air cushions, not as a lock to hold the load without live air pressure.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-100 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X135-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke135 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-100

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×135Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-100 Is Used

settings_input_component

Variable Product Changeover

Dial in the exact retract distance from 35 to 135 mm when switching between different product lengths on a packaging line.

tune

Commissioning Fine-Tuning

Eliminate mechanical shimming by using the rear stopper to perfectly set the end-of-stroke position during initial machine setup.

precision_manufacturing

Adjustable End-Stop Machining

Provide a variable physical travel limit for light assembly operations where the stroke length must be matched to the tooling.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-100 the Right Cylinder?

The 100 mm adjustment range is ideal for machinery processing varying product sizes, allowing you to fine-tune the retract position on the fly rather than swapping a fixed-stroke SAI cylinder. For load-holding requirements without continuous air pressure, this cylinder is not suitable; consider the SAIL or BSAI series instead. When matching ISO 15552 replacements, verify the 135 mm stroke, 100 mm adjuster range, PT G1/4 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-100 FAQ

The operating speed range is 30-800 mm/s, supported by 30 mm cushions at both ends.

The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from 135 mm down to 35 mm. It sets the travel end and deceleration point but does not lock or hold the load without live air.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X135-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.