verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X135-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 135mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke135 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$75.13 $82.63Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-40

The AirTAC SAIJ40X135-40 is a double-acting ISO 15552 profile cylinder featuring a rear mechanical stopper that allows you to trim the effective travel. With a 135mm nominal stroke and a 40mm adjustment range, you gain a usable travel window of 95-135mm to perfectly dial in end positions without swapping hardware.

This bore size features G1/4 PT tapered ports and 30mm variable air cushions at both ends to manage end-of-stroke deceleration. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches if needed later. It supports speeds from 30-800mm/s and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X135-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke135 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×135Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-40 Is Used

settings_input_component

Machine Changeovers

Dial in the 95-135mm travel window during product format changes to set new end positions instantly without replacing the cylinder.

precision_manufacturing

End-Position Tuning

Fine-tune the retract stopper at commissioning to perfect the seating of parts, avoiding the need for external shims.

conveyor_belt

Adjustable Ejection

Vary the ejection distance on a conveyor line by trimming the stroke back up to 40mm to handle different package sizes.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-40 the Right Cylinder?

If you need less force, stepping down to a 32mm bore provides 402N; if your load demands more, a 50mm bore yields 982N. The 40mm adjustment range here is ideal for product-size changeovers on a packaging line, letting you reset the retract end-stop quickly rather than machining external spacers.

Because the rear adjuster and air cushions only regulate travel and deceleration, they will not hold a load without live air. For dead-stop holding, consider an AirTAC SAIL or BSAI cylinder. To match this ISO 15552 replacement exactly, specify a 135mm stroke, up to 40mm adjustment, PT G1/4 ports, and the standard carbon steel rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-40 FAQ

A rear stopper screw lets you shorten the 135mm nominal stroke by up to 40mm, creating a usable travel window of 95-135mm. This allows you to set the exact end position during setup without adding external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X135-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.