
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X135-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 135mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X135-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 60 to 135 mm, allowing you to dial back the nominal stroke by up to 75 mm during commissioning.
This extruded aluminum barrel design incorporates variable air cushions at both ends to manage deceleration. The adjuster acts purely as a travel stop and does not hold the load without live air pressure. For position holding, consider the SAIL or BSAI series. The carbon steel piston rod features an M12x1.25 thread, and the body includes dual-side sensor grooves compatible with CMSE reed and DMSE electronic switches when a magnet is specified.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X135-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 60 to 135 mm during product size transitions on a packaging line without changing hardware.
Fine-tune the final end stop during machine commissioning to compensate for mechanical tolerance stack-up without adding external stops.
Adjust the stroke length on a conveyor sorting arm to accommodate different package widths on the fly.
Select this 40 mm bore model when your assembly requires on-the-fly end-position tuning across a 60 to 135 mm range without swapping out the entire actuator. Choose the SAIJ adjustable format over a fixed-stroke SAI cylinder when you anticipate product changeovers or need to fine-tune the retract distance on the fly.
As a dimensionally interchangeable ISO 15552 cylinder, it replaces units matching that standard using a PT G1/4 port. It supports a mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options. Operating speed ranges from 30 to 800 mm/s. Remember that the rear screw is a stop, not a lock; use an external rod lock or pilot-operated check valve for fail-safe load holding.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 75 mm from the 135 mm nominal length, giving a usable travel window of 60 to 135 mm. It acts as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.