
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X140-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 140mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X140-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 130-140 mm usable travel window, allowing you to dial back the 140 mm nominal stroke by up to 10 mm during commissioning.
This extruded aluminum profile cylinder includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches. It uses a standard carbon steel rod with an M12x1.25 thread and a PT tapered port. The rear adjuster acts strictly as a travel stop for end-position tuning, meaning it will not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 130-140 mm travel distance during machine commissioning to perfect the final clamping or positioning force without physical shims.
Quickly adjust the retract end-stop by up to 10 mm on a packaging line when switching to a slightly different product size, minimizing downtime.
Set precise variable end-stops on automated assembly equipment where a fixed 140 mm stroke might slightly overshoot or impact the workpiece.
The 10 mm adjustment range is ideal for machine setup and product changeover, letting you fine-tune the end stop without swapping cylinders or adding external physical stops.
For ISO 15552 replacement matching, verify the 140 mm stroke, 10 mm adjustment range, PT port thread, and standard carbon steel rod. Because the 140 mm stroke is under 300 mm, side-load stress is moderate, but the M12x1.25 rod thread still requires an external guide for heavy lateral loads. Note that for load-holding without live pressure, you must use a SAIL lock or BSAI clamp-lock cylinder instead of relying on this adjuster.
Quick checklist
The rear adjusting screw acts as an external stopper, allowing you to shorten the effective travel from 140 mm down to 130 mm. This provides a 130-140 mm adjustable window for fine-tuning without changing the cylinder, but it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.