
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X140-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 140mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X140-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a broad usable travel window of 40 to 140 mm, allowing you to dial back the nominal stroke by up to 100 mm during commissioning.
This extruded aluminum profile cylinder includes sensor grooves on both sides for flexible switch placement. It uses a PT tapered port thread and a carbon steel piston rod. The rear adjuster acts strictly as a mechanical stop to set the end position, meaning it cannot hold a load without continuous live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the end-of-stroke position for different product sizes on a packaging line without replacing the actuator.
Dial in the exact travel distance during initial R&D setup, fine-tuning the 40 to 140 mm window to find the optimal kinematic motion.
Use the rear mechanical stop to establish precise, repeatable retract positions for assembly tooling across multiple batches.
The massive 100 mm adjustment range is ideal for prototyping or production lines requiring frequent product-size changeovers, eliminating the need to swap cylinders or bolt on external stops. For load-holding without air pressure, consider an AirTAC SAIL or BSAI cylinder instead.
To match this ISO 15552 dimensionally interchangeable cylinder, specify: 40 mm bore, 140 mm stroke, 100 mm adjustment, PT port thread, and carbon steel rod. Since this is a non-magnet model, add an -S suffix if you require CMSE reed or DMSE electronic sensors. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the 140 mm nominal stroke by up to 100 mm, creating a usable travel window of 40 to 140 mm. It only sets the end position and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.