
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X140-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 140mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X140-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 140 mm stroke with an adjustable travel window of 120 to 140 mm, allowing you to dial in the exact retract position during commissioning.
This extruded aluminum profile cylinder includes variable air cushions at both ends to manage deceleration. The rear adjuster acts strictly as a mechanical stop to fine-tune the end position, not as a lock, meaning it will not hold a load without live air pressure. For position holding without compressed air, consider the SAIL or BSAI series instead.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the retract end-stop by up to 20 mm when switching between product sizes on a packaging line, avoiding physical cylinder swaps.
Fine-tune the exact resting position of a tooling head during commissioning to achieve precise alignment without adding external mechanical stops.
Adjust the stroke window from 120 to 140 mm on a conveyor sorting arm to accommodate different package widths on the fly.
The adjustable 120-140 mm travel window is ideal for machine setups requiring variable end stops or product changeovers without swapping the cylinder. Since the standard configuration lacks a magnet, it does not support CMSE or DMSE sensors; add the -S option if electronic or reed switch feedback is required.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 140 mm stroke, 20 mm adjustment range, PT port thread, and mounting choice. The SAIJ supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. Because the stroke is under 300 mm, side-load risks are moderate, but the 16 mm carbon steel rod still requires external guiding for heavy lateral loads.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective travel from the nominal 140 mm down to 120 mm. It functions as a mechanical stop to set the retract position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.