
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X140-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 140mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X140-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window down to 110-140 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later.
Unlike a fixed-stroke SAI, the built-in rear stopper lets you dial in the exact retract position on product changeovers without adding external stops. The 16mm carbon steel rod and M12x1.25 thread handle moderate side loads, while the PT tapered port ensures a tight pneumatic seal. Remember that the adjuster is a travel stop, not a lock; for load-holding without live air, explore the SAIL or BSAI series.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 110-140mm retract position during initial commissioning without swapping cylinders or machining external stopper blocks.
Quickly adjust the end-stop by up to 30mm to accommodate slight length differences when switching between product variants on the line.
Achieve precise end-position tuning on automated machinery using the rear adjuster to trim the effective stroke as process requirements evolve.
If you need higher force, stepping up to the 50mm bore yields 982N, while dropping to a 32mm bore limits you to 402N. The 30mm adjustment range is ideal for accommodating minor product size variations on a packaging line.
When replacing an ISO 15552 cylinder, match the 40mm bore, 140mm nominal stroke, PT port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the total stroke is under 300mm, side-load stress on the 16mm rod is minimal, though an external guide is always recommended for heavy lateral loads.
Quick checklist
The rear adjusting screw acts as an external stopper, allowing you to shorten the effective travel from the 140mm nominal stroke down to a minimum of 110mm, creating a 30mm adjustable window.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.