
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X140-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 140mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X140-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 90 to 140 mm. The extruded aluminum barrel features sensor grooves on both sides for flexible mounting of CMSE reed and DMSE electronic switches.
Because the rear screw acts as a hard stop to mechanically trim the retract end, you can fine-tune the end position during commissioning without swapping out the cylinder or adding external stops. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR. Remember that this rear adjuster and the variable air cushions only set the travel end; they do not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 90 to 140 mm retract distance during initial commissioning to perfectly align tooling without machining external spacers.
Quickly adjust the end-stop on packaging lines when switching between different product sizes, minimizing downtime between production runs.
Fine-tune the end-of-stroke position to compensate for mechanical wear or slight variations in incoming material thickness on the fly.
An adjustable stroke is selected over a fixed SAI cylinder when a machine requires variable end-stops for rapid product changeovers. To replace an ISO 15552 cylinder, match the 40mm bore, 140mm stroke, 50mm adjustment, PT port thread, and the -S magnet option. For load-holding without live air pressure, use an external rod lock or pilot-operated check valve, or select a SAIL or BSAI cylinder instead.
Quick checklist
The rear adjuster screw lets you shorten the nominal 140mm stroke by up to 50mm, creating a usable travel window of 90 to 140mm. The adjuster acts as a mechanical stop on the retract end and does not function as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.