verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X140-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 140mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke140 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$75.13 $82.63Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-75

The AirTAC SAIJ40X140-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This creates a usable stroke window of 65 to 140 mm, letting you fine-tune the retract end-position during commissioning without swapping out the unit.

This extruded aluminum profile cylinder uses a PT tapered port thread and includes variable air cushions at both ends to decelerate the moving load. The rear adjuster functions strictly as a mechanical stop to set the travel limit and does not hold the load without live air pressure. For position holding without continuous air, consider the SAIL or BSAI series instead.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X140-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke140 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×140Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-75 Is Used

tune

Machine Changeover

Dial in the 65-140 mm travel window during product size transitions to set new retract positions quickly without replacing the cylinder.

precision_manufacturing

Variable End Stops

Use the 75 mm rear adjustment screw to set precise retract limits for tooling calibration during the initial machine commissioning.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-75 the Right Cylinder?

Choose this 40 mm bore when your application requires a variable end-stop within a 65-140 mm travel window, such as accommodating product size changes on a line without bolting on external stops.

When matching this for an ISO 15552 replacement, verify the 140 mm stroke, the 75 mm adjustment range, the PT port thread, and the standard carbon steel rod. Because the total stroke is under 300 mm, side-load stress on the 16 mm rod is moderate, though an external guide is still recommended for heavy lateral loads. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-75 FAQ

At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.

The rear adjuster acts as a mechanical stop that allows you to shorten the 140 mm nominal stroke by up to 75 mm. This results in a usable travel window of 65 to 140 mm, enabling fine-tuning of the end position without adding external stops.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X140-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X140-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.