
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X145-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 145mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X145-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 100 mm. This yields a usable stroke window of 45 to 145 mm, enabling precise end-position tuning at commissioning without swapping the hardware or adding external stops.
This model features a 16 mm carbon steel piston rod with an M12x1.25 thread, providing a robust interface for attachments. It uses PT tapered port threads (G1/4) and includes variable air cushions at both ends to manage deceleration. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for position holding without continuous air, consider the SAIL or BSAI series. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the stroke from 45 to 145 mm during product size changes without replacing the cylinder or bolting on external stops.
Fine-tune the retract end position during commissioning to achieve exact sensor triggering and part placement.
Adjust the travel limit on the fly for conveyor diverters or gating mechanisms handling different package lengths.
Choose this 40 mm bore adjustable cylinder when your setup requires variable end-stops or frequent product-size changeovers on a line. If your application demands less push force, stepping down to the 32 mm bore yields 402 N at 0.5 MPa, whereas stepping up to the 50 mm bore provides 982 N for heavier loads. The wide 45-145 mm adjustable window here is ideal for prototyping or machines processing varied part sizes.
When matching this ISO 15552 dimensionally interchangeable cylinder to an existing fixture, verify the 40 mm bore, 145 mm nominal stroke, 100 mm adjustment range, PT G1/4 port, and the required mounting bracket. Note that the 16 mm rod and thread carry decent side load capacity, but for this 145 mm stroke, always guide the load externally to prevent rod binding. To add position feedback, order a version with the -S magnet for use with CMSE reed or DMSE electronic sensors.
Quick checklist
The rear adjuster screw lets you shorten the nominal 145 mm stroke by up to 100 mm, creating a usable travel window of 45 to 145 mm. The adjuster is a mechanical stop that sets the end position and works with the air cushion for deceleration, but it does not hold the load without live air pressure.
At the maximum operating pressure of 1.0 MPa, it can deliver up to 128 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.