
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X145-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 145mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X145-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the external stopper screw, you can shorten the effective travel, creating a usable stroke window of 125 to 145 mm to perfectly dial in end positions without adding external stops.
This model features a 16 mm carbon steel piston rod and an M12x1.25 rod thread, offering a robust interface that handles side loads effectively. Pneumatic connections use a PT G1/4 tapered port, and the extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 125-145 mm travel window during product changeovers to set new end positions without physically swapping the cylinder.
Dial in the exact retract position during initial commissioning using the rear adjuster, eliminating the need for bolted-on external stops.
Accommodate varying package sizes on a line by adjusting the effective stroke back by up to 20 mm to meet specific pusher distances.
Choose this adjustable-stroke SAIJ variant when your machine setup requires frequent commissioning fine-tuning or product-size changeovers that a fixed-stroke SAI cylinder cannot accommodate. If your application demands less force, stepping down to a 32 mm bore yields 563 N at 0.7 MPa, while moving up to a 50 mm bore increases output to 1374 N.
For dimensionally interchangeable ISO 15552 replacements, match the 40 mm bore, 145 mm stroke, 20 mm adjustment range, PT G1/4 port, and your required mounting interface. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Because this unit lacks a magnet, position sensing requires external methods rather than CMSE or DMSE switches.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the 145 mm nominal stroke by up to 20 mm, providing a usable travel window of 125 to 145 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.