verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X145-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 145mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke145 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$75.13 $82.63Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-40

The AirTAC SAIJ40X145-40 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal 145 mm stroke and a 40 mm adjustment range, it provides a usable travel window of 105-145 mm. This allows you to fine-tune the retract end-position at commissioning without adding external stops.

The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches. It uses a G1/4 port and a 16 mm carbon steel rod with an M12x1.25 thread, providing a solid foundation for moderate side loads. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, deliberately omitting FB, CA, CB, and CR options.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X145-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-40 Is Used

tune

Machine Changeover

Dial in the retract position within the 105-145 mm window during product size transitions without swapping hardware.

precision_manufacturing

End-Position Tuning

Fine-tune the final resting point at commissioning to compensate for mechanical tolerances in a new assembly.

settings_input_component

Variable End Stops

Use the 40 mm rear adjustment screw to set custom travel limits for delicate pressing or clamping tasks.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-40 the Right Cylinder?

The 40 mm adjustment screw lets you trim the stroke back by up to 40 mm on the fly, offering far more flexibility than a fixed-stroke SAI cylinder. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider an external rod lock or the SAIL series. To match this ISO 15552 replacement, specify a 40 mm bore, 145 mm stroke, 40 mm adjustment, PT tapered port threads, and no magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-40 FAQ

It features a rear adjuster screw that allows you to shorten the nominal 145 mm stroke by up to 40 mm, giving an effective travel range of 105-145 mm. The adjuster acts as a stop to set the end position and is not a lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X145-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ40X145-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.