
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X15-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 15mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X15-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 5 to 15 mm, allowing you to dial back the 15 mm nominal stroke by up to 10 mm during commissioning.
This variant uses a standard carbon steel piston rod with an M12x1.25 thread and PT tapered ports. The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X15-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 5 to 15 mm travel window during machine commissioning to perfect clamping or pressing positions without machining external stopper blocks.
Quickly adapt the cylinder's effective stroke on automated lines when handling slightly different product sizes, reducing downtime between production runs.
Use the rear adjuster to safely trim the 15 mm stroke down to 5 mm for delicate micro-assembly tasks that require extremely short, precise movements.
Choose this adjustable-stroke model when an application requires fine end-position tuning without adding external stops or swapping cylinders. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series. Because the stroke is under 300 mm, side-load stress on the M12x1.25 rod is minimal, though external guidance is always recommended for lateral loads.
When specifying a replacement, verify the 40 mm bore, 15 mm nominal stroke, 10 mm adjustment range, PT port thread, and the reduced SAIJ mounting set. If fixed end-of-stroke positioning is sufficient, the standard SAI series is a simpler alternative.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjusting screw acts as a travel stop, allowing you to shorten the 15 mm nominal stroke by up to 10 mm. This creates a usable travel window of 5 to 15 mm for fine-tuning the retract end position at commissioning.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.