
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X150-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X150-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The built-in adjuster allows you to dial back the 150mm nominal stroke by up to 10mm, creating a precise 140-150mm usable travel window for fine-tuning at commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or add external stops when product sizes change slightly on a machine. It features variable air cushions at both ends to decelerate the load, but the rear screw acts only as a travel stop and does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE sensors.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X150-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 140-150mm travel window during machine commissioning to achieve exact positioning without machining external stopper blocks.
Quickly adjust the rear screw on the line when switching between product sizes that require slightly different cylinder extension lengths.
Set precise retract positions for conveyor sorting arms, allowing easy recalibration if the lane spacing or product profile changes.
If you need less force, stepping down to a 32mm bore yields 402N, while stepping up to a 50mm bore provides 982N. The adjustable rear stopper is ideal for product changeovers where exact end-positioning varies slightly, serving as a physical stop rather than a lock. For position holding without live air, consider the SAIL or BSAI series instead.
When replacing an ISO 15552 cylinder, match the 40mm bore, 150mm stroke, 10mm adjustment range, PT tapered port thread, and the required mounting style. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because the 150mm stroke is under 300mm, side-load stress on the 16mm rod is moderate, though external guides are still recommended for heavy lateral loads.
Quick checklist
The rear adjuster screw allows you to shorten the 150mm nominal stroke by up to 10mm, giving a usable travel window of 140-150mm. This stopper only limits the travel end and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.