
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X150-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X150-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 150 mm stroke that can be dialed back by up to 40 mm, giving you a precise 110-150 mm usable travel window for fine-tuning end positions at commissioning.
This -S variant includes a magnet for CMSE reed and DMSE electronic solid-state sensors, which mount neatly into the extruded aluminum barrel's dual sensor grooves. The carbon steel rod features an M12x1.25 thread, and the PT tapered port ensures a tight pneumatic seal. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X150-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 110-150 mm travel window during product size changes without physically replacing the actuator or bolting on external stops.
Fine-tune the retract end position at commissioning to achieve exact mechanical alignment, absorbing minor tolerances in the fixture.
Provide an adjustable physical stop for a diverting arm or pusher, allowing operators to quickly reconfigure the stroke length on the fly.
The adjustable 110-150 mm window is perfect for product changeovers on a line, letting you shift the retract end-stop without swapping the cylinder or adding external stops. If your machine requires the load to be held mechanically without live air, note that the rear adjuster is a travel stop, not a lock; you would need an external rod lock or a related type like SAIL or BSAI.
For an exact ISO 15552 replacement, match the 40 mm bore, 150 mm nominal stroke, 40 mm adjustment, PT port, and -S magnet. Because the stroke is 150 mm, side-load risks are moderate, but always ensure proper external guiding for unsupported loads. The carbon steel rod and M12x1.25 thread provide robust anchoring, though long strokes still demand precise alignment.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
A rear screw stopper allows you to shorten the effective stroke by up to 40 mm from the nominal 150 mm, creating a 110-150 mm travel window. The adjuster acts as a stop and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.