
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X150-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X150-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel between 100 and 150 mm without swapping out the unit. This makes it a robust choice for mid-range actuation tasks requiring exact end-position tuning.
Because the adjuster functions purely as a mechanical stop, it relies on the integrated air cushions to decelerate the load at the end of the stroke but cannot hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount CMSE reed or DMSE electronic switches if position feedback is needed later.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X150-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retraction point between 100 and 150 mm during machine commissioning to accommodate different part lengths without adding external stopper blocks.
Quickly adjust the stroke window on packaging conveyors when switching between box sizes, minimizing downtime and avoiding the need to swap out entire cylinders.
The 50 mm adjustment window is ideal for production lines running mixed product sizes, giving you a 100-150 mm usable travel range to dial in during changeovers instead of machining external hard stops. If your application requires the load to be held securely in place without continuous compressed air, a standard SAIJ is insufficient and you should look to the SAIL pneumatic lock or BSAI clamp-lock series instead.
When replacing an ISO 15552 cylinder, verify that the 150 mm stroke, 50 mm adjustment range, PT G1/4 port, and required mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2) all match your existing footprint. Note that SAIJ omits the FB, CA, CB, and CR mounting options found on some other profiles.
Quick checklist
If operated at 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the nominal 150 mm stroke by up to 50 mm. This creates a usable travel window of 100 to 150 mm, which can be fine-tuned during setup, though it does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.