
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X150-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X150-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 150 mm stroke that can be dialed back by up to 75 mm, creating a highly flexible 75-150 mm usable travel window for precise end-position tuning.
This extruded aluminum profile cylinder omits the FB, CA, CB, and CR mounts, utilizing a focused mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The carbon steel rod with an M12x1.25 thread handles side loads well, but the rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X150-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 75 and 150 mm during commissioning to accommodate multiple product sizes on a single fixture.
Quickly adjust the stroke length on product line changeovers without physically replacing the cylinder or bolting on external mechanical stops.
Choose this 40 mm bore when you need more force than the 32 mm version (402 N at 0.5 MPa) but want to avoid the bulk of a 50 mm cylinder (982 N at 0.5 MPa). The generous 75 mm adjustment range is perfect for machines requiring frequent product changeovers, allowing you to reset the retract end-position without swapping cylinders or adding external stops. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead.
When matching this ISO 15552 cylinder for a replacement, verify the 150 mm nominal stroke, 75 mm adjust code, PT tapered port thread, and the specific mounting hardware. Because it lacks a magnet, it will not work with CMSE or DMSE sensors unless you add the -S option.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm from the 150 mm nominal length, providing a usable travel window of 75 to 150 mm. It acts as a mechanical stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.