
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X150-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 150mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X150-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this specific SKU carries a 75mm adjustment code on a 150mm nominal stroke, you gain a highly flexible usable travel window of 75-150mm, letting you dial back the extend position by up to 75mm during commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops when fine-tuning machine setups. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet supports position detection via AirTAC CMSE reed or DMSE electronic solid-state switches. The rear adjuster acts purely as a mechanical travel stop to set the end position, so it will not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X150-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Perfect for machines requiring a variable end-stop, allowing operators to trim the extend stroke anywhere within the 75-150mm window without changing hardware.
Ideal for conveyor sorting systems where product sizes change frequently, letting you quickly fine-tune the cylinder's extended working position during line changeover.
Useful for dialing in exact end-of-stroke positions during machine commissioning, preventing the need to machine custom external spacers or stopper blocks.
If you need less force, the 32mm bore offers 402N; if you need more, the 50mm bore provides 982N. Choose this adjustable-stroke SAIJ model over a fixed-stroke SAI when you need a variable end-stop to accommodate product changeovers. For load-holding without continuous air pressure, the rear stopper here is not a lock—you should look at the SAIL or BSAI series instead.
This SAIJ40X150-75-S configuration includes a PT tapered port thread (G1/4), a standard carbon steel rod, and the -S magnet option. It supports the reduced SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Since the nominal stroke is 150mm, side-loading is moderate, but always guide long unsupported loads to protect the rod seals.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
The rear mechanical stopper lets you shorten the 150mm nominal stroke by up to 75mm, creating a usable travel window of 75-150mm. It functions as a travel stop, not a lock, so it cannot hold a load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.