
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 145 to 155 mm, enabling precise end-position tuning at commissioning without adding external stops.
This bore size features a 16 mm carbon steel rod with an M12x1.25 thread, offering robust resistance to side loads, and uses a PT G1/4 port. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches if a magnet is added later. It supports speeds from 30 to 800 mm/s and uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 145 to 155 mm end-stop during initial commissioning to perfect part seating without machining custom spacers.
Quickly trim the stroke by up to 10 mm on the rear screw when switching to a slightly shorter product variant on the line.
Fine-tune the retract end position to accommodate minor variations in incoming material lengths on automated assembly equipment.
The 10 mm rear adjustment is ideal for product changeovers, allowing you to dial back the 155 mm nominal stroke by up to 10 mm without swapping the cylinder.
Because the rear adjuster acts as a travel stop rather than a lock, this SAIJ model cannot hold a load without live air pressure. For secure load-holding without continuous air, consider the SAIL or BSAI series. When replacing an ISO 15552 cylinder, match the 155 mm stroke, 10 mm adjustment, PT G1/4 port, and the required mounting interface. Since the stroke is under 300 mm, external side-load guides are less critical than with longer strokes, but standard alignment practices still apply.
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the 155 mm nominal stroke by up to 10 mm, creating a usable travel window of 145 to 155 mm. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.