
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring an integrated rear stroke adjuster. By turning the external rear stopper screw, you can dial back the nominal 155mm travel, creating a wide 55-155mm usable stroke window for highly flexible positioning.
This substantial 100mm adjustment range is ideal for machines processing varied product sizes, allowing you to shift the retract end-position during changeovers without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed and DMSE electronic switches. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, intentionally omitting FB, CA, CB, and CR brackets to streamline the adjustable rear assembly.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract distance anywhere between 55mm and 155mm to accommodate changing material lengths or thicknesses on the fly.
Perfectly align tooling end positions during machine setup without machining new spacer blocks or disassembling the pneumatic circuit.
Rapidly adapt automated lines for different product dimensions by simply rotating the rear adjustment screw to shift the effective stroke.
If you need less adjustment range, stepping down to a SAIJ40X155-20 limits the window to 135-155mm, while stepping up to a 50mm bore increases thrust to 982N. Because the 155mm stroke is under 300mm, side-load stress on the 16mm rod thread is manageable, though external guides are still recommended for heavy lateral loads.
The rear adjuster acts strictly as a mechanical travel stop to set deceleration alongside the adjustable air cushions, but it cannot hold a load without live air pressure. For fail-safe load holding, select the SAIL pneumatic lock series or the BSAI clamp-lock variant. To replace an existing ISO 15552 cylinder, match the 40mm bore, 155mm stroke, 100mm adjustment, G1/4 PT port, and your required mounting bracket.
Quick checklist
The rear stopper screw allows you to shorten the 155mm nominal stroke by up to 100mm, creating a usable travel window of 55-155mm. The adjuster sets the end position and works with the air cushions to control deceleration, but it is a stop, not a lock, and requires live air to hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.