
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X155-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 155mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X155-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear mechanical stroke adjuster. It provides a nominal 155 mm stroke that can be dialed back by up to 100 mm, yielding a wide 55-155 mm usable travel window for highly variable end-position tuning. The extruded aluminum barrel features sensor grooves on both sides, and this -S variant includes a magnet for position detection.
This model uses a carbon steel piston rod with an M12x1.25 thread and G1/4 PT tapered ports. The rear adjuster acts purely as a travel stop to set the retract end position without adding external stops, but it does not lock the load without live air pressure. For load-holding requirements, a SAIL or BSAI series cylinder is required. It supports speeds of 30-800 mm/s and includes variable air cushions at both ends.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X155-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 55 to 155 mm during machine commissioning to accommodate multiple product sizes without changing the cylinder.
Rapidly adjust the travel distance on packaging lines when switching between different package lengths, minimizing downtime.
Choose this 40 mm bore cylinder when an application requires significant on-machine travel variance rather than a fixed 155 mm stroke. The 100 mm adjustment range is ideal for product changeovers, allowing operators to dial in the exact retract distance without swapping hardware.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 155 mm stroke, 100 mm adjustment, G1/4 PT ports, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 configurations. Because the total stroke is 155 mm, side loads are minimal, but an external guide should still be used for heavy lateral loads.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 100 mm. This creates a usable travel window of 55-155 mm so you can fine-tune the end position at commissioning without external stops.
At the maximum 1.0 MPa pressure, it delivers up to 128 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.